#FPV3- Dura-Post 3.0mm uPVC Posts are suited for Low Impact Areas and are a great Contractor Option.

#FPV4- Dura-Post 4.0mm uPVC Posts are suited for Medium Impact Areas.

#FPV5- Dura-Post 5.0mm uPVC Posts are suited for High Impact Areas.

#FPV4- Vinyl letters or numbers can be applied to uPVC Marker Posts.

#FSG21- Ultra High Strength Steel Guide Posts can be manually or mechancially installed with Dura-Post Installation Equipment. UHS Guide Posts are designed to be driven into high compaction areas.

#FSG2- Installation options; - Insert into ground socket or Oz post - Surface Mount Adaptor FSG2162 - Concrete into place

#FSG21- Standard Steel Guide Posts can be installed with the Dura-Post Manual Driver, Budget Steel Guide Posts also available for use in Low Impact Zones.

#FSG21- Premium Steel Guide Posts can be manually or mechancially installed with Dura-Post Installation Equipment.

#FSP32- Reflex Marker Posts are made from durable, flexible steel and powdercoated in your choice of colour. All posts are customisable with any variation of self adhesive vinyl or delineation.

#FPV6- “Dura-flex Flexible Delineator Post System”. This new flexible delineator post is manufactured from high impact U.V. stabilized premium quality PVC. It is 100% Australian made and is fully recyclable and is an alternative to spring steel type flexible guide posts.

#FPV65- Duraflex Pro Flexible Delineator Posts come complete with Red delineators on the face and White delineators on the rear.

#FGP12- The Dura-Post Flexi360 Pro is also available as a Marker Post; Colours available are White, Yellow, Orange, Green and Blue. Flexi360 Pro's can also be installed using the Dura-Post Pro series Manual Driver.

#FGP113- 2 Part Option sold complete with post and 350mm Drivable Picket Anchor - See Flexi360 Components for other Drivable Anchor Options

#FGP117- 2 Part Option sold complete with flexible post and surface mount plate - See Flexi360 Components for other Surface Mount Options. The surface mount plate is 175mm X 65mm X 5mm MS. The plate can be bolted down, it has two 10mm diameter holes each end. Other Post colours available, Yellow, Blue, Green and Orange see Flexi360 Coloured Marker Posts.

#FGP11- 2 Part Option sold complete with flexible post and round surface mount base - See Flexi360 Components for other Surface Mount Options. The surface mount base is 190mm diameter and is 25mm high and can be glued down using a 2 part poly adhesive or heat down butyl pad.

#FGP11- 2 Part Option sold complete with flexible post and surface inline mount plate - See Flexi360 Components for other Surface Mount Options. The surface inline mount plate is designed to conceal the method of installation and needs minimal space to be bolted down. Inline Surface Mount Plates FPB1605 come with 2 of 10mm x 75mm counter sunk head dynabolts. Position Surface Mount Plate and drill holes as required, fit dynabolts and tighten plate into position.

#FMP1- Flexi360 Flexible Marker Post Components available in Yellow, Orange, Blue, Green and White.

#FMP13- Flexi360 Flexible Marker Post Components available in Yellow, Orange, Blue, Green and White.

#FPF15- Flexi360 Flexible Guide and Marker Posts can be installed using a range of Drivable Anchors, for soft to medium ground types or where greater retention is required there is the Spade Drivable Anchor and for medium to hard ground types the Picket Drivable Anchor, easily driven into the most challenging surfaces and compaction.